The humidity set point can be adjusted in 1% increments. Setting it is very simple to do. This unit comes with a 40 inch remote sensor that can be placed where you need it. It also has a remote temperature sensor so it can compensate humidity measurements for changes in temperature. Please note: this device does not display the temperature. Set point can be adjusted to any humidity level between 1% - 99% Runs on 110V AC and will power 110V AC devices. If you have a DC device, you'll need a power converter to change AC to DC (like a laptop power supply). Calibration enabled. This means that you can calibrate the hygrostat, if required. For example, if you have a hygrometer that you trust and the digital hygrostat reads a little different, you can calibrate the hygrotstat to match the trusted hygrometer (calibrate in 1% increments up to +/- 10%) You are able to change the hysteresis from 1% - 30%. This means you are able to set the range of humidity that turns the power on and off. For example, if you set a hysteresis of 5, the hygrostat will wait until the humidity level has dropped 5% below your set point before turning on the power. It will turn off the power as soon as the level hits the set point This device can also be set to control the power for a humidifying device or a dehumidifying device (only one at a time, it can't do both at a time). You will notice in the pictures that there are two different sensor probes. The larger one senses the moisture level. The smaller one measures temperature so that the humidity sensor can compensate for changes in temperature. As noted above, this unit does not display temperature. What devices can I use with this device to get water into my container? Great question! There are three main options to consider. 1. Water valve 2. Small water pump 3. Humidifier As always, all of our products are covered by our One-year Hassle-free Guarantee.
Trustpilot
2 weeks ago
2 months ago
