4pcs Computer Mainboard CPU Radiator Fan Fixing Clip Computer Cooling Accessories, 12CM Wire Buckle Upper Hook Type

I bought these because I accidentally threw away the correct clips to a Thermalright cooler I had purchased for a new build. They worked great. Kept the extra two clips I didn't use in case I add a fan in the future or make a similar mistake on a future build.

I actually bought these to put a 2nd fan on my cooler, with the intent of only using 2 of them, but they fit much better than the ones that came with my cooler, so I ended up using all 4 of them and replaced the two that came with the cooler.The stock ones allowed my fan to move around a bit and sag, but these keep them in place with no sag or movement. Great fit.

I needed to fit a 15mm fan instead of the stock 25mm fan on my Thermalright heatsink and the clips that came with the heatsink were too big. These clips worked just fine! I did have to bend them to hold the fan on as the hooks on the end were shorter than the stock fans.

Works for a NH-U12A with modifications. Bend the arms over inwards towards one another at about a 45-degree angle with a pair of needle nose. Bend the top of the arms back down so it looks like a Z and then twist the short hook, so it faces straight down. They will secure the fans just right.

Works as intended for a Noctua fan. Need to figure out how to make my own firm wires at these prices however, its way too expensive for what it is.

These are great. I added another fan to my 120m single fan CPU cooler.

The cheap plastic fan clips on my CoolerMaster Hyper 212 EVO CPU Cooler broke and after searching for replacements I found these clips! For the Hyper 212 EVO you need to remove the foam spacers that covers the screws which fasten the plastic clips to the fan. The metal wire clip fits perfectly and holds the fan tightly to the aluminium fins.I highly recommend them!

Perfect fit.