Silverline 675120 Roller Stand Adjustable 685 - 1080 mm

I don’t know how you can use a chop saw without one of these. The build quality is excellent well worth the money. Other makers are a lot more expensive this make dose the same job.

This is a very useful bit of kit for use with a bench saw when cutting long pieces. Roller runs very smoothly and in general if works well. I have only one (actually two!) gripe. The attachment of the cross tube feet is by means of a bolt screwing in to a bar which is located in two opposing holes at the bottom of the legs. Problem is - the bar is too short and there is no locating device to stop it pulling out of one of the holes and disappearing into the square leg tube. This has happened with both legs and required the addition of a spacer limiting the freedom of the bar to move. Otherwise, a good tool.

Does exactly what it needs to, allowing me to cut larger items on a table saw. I will buy more at some point. Very quick to assemble, however the bolt holding one of the feet in place slips out on one side very easily as it does not appear to be long enough to support the leg if there is too much leg movement.Easy to fold and store and takes up minimal room. Feels like a good quality and the height adjustment is very easy to use.

If you read my review of the Draper roller stand, you'll know my opinion of the heap of junk that Draper produced. Just bought 2 of these (I'm a roller stand enthusiast it seems...) for half the price of the Draper abomination. A simple device, but the Silverline stand is as different from the Draper as chalk from cheese. Well packaged, well made, semi-assembled and nicely finished. The 2 Silverline stands are a bargain at 14 quid, if you need roller stands - buy these...

This roller stand was easy to assemble and works well in practice. It easily folds up for storage.

They work well but I have noticed rust building up on the main shaft even though they are hanging in my dry shed.

Inside each of the feet is a short length of metal bar ('slug') with a hole in it. To attach a foot to a leg you need to spear this thing with a bolt. Even if you manage to slide the slug so that it is opposite the bolt hole in the foot, it is highly unlikely that the hole in the slug will be facing you! My solution was to remove a rubber foot end to extract the slug and then hot glue it to a length of rod. I was able to a) get in the right position and b) rotate it to insert the bolt. Once that's done the rod and glue will snap off.I hope this helps because I've absolutely no idea how the manufacturer thinks you're supposed to do it!

Ideal for supporting long lengths of skirting when cutting. Purchased for one specific job, and thought they would then go in the garage and collect dust and not be used. I have found them extremely useful for three other jobs since. Well worth the money.

È il secondo che acquisto. Viste le qualità di robustezza e funzionalità ne ho acquistato un secondo per poter lavorare con oggetti più lunghi. Ottimo!

Es fuerte.

Tréteaux détournés pour faire une table de travail de 200x60x2,2. J'ai bloqué les rouleaux qui me serviront peut-être plus tard. Facile à monter, très stables, réglables sur la hauteur, peu encombrants. Très bon rapport qualité/prix. Il y a une clé mâle 6 pans creux pour chaque tréteau. Détails : pas de clé femelle plate 6 pans pour les écrous. Repérer vos réglages de hauteur sur la barre. Je recommande ce produit.

Zeer practisch als steun voor afkortzaag

Für Euro 20,- (zum Zeitpunkt des Kaufes) habe ich weniger erwartet, bzw. befürchtet.Insofern bin ich positiv überrascht und mit dem Artikel sehr zufrieden.Schnelle und simple Montage. Alles passte sehr gut zusammen und nichts fehlte.Der Rollenständer macht einen sehr stabilen Eindruck und wird sicherlich lange seine Dienste tun.Hier passt der Preis, ich habe nichts auszusetzen und gebe darum alle Punkte.