Nilight 10016W DT Wiring Harness Kit for LED Light Bars - 12V On/Off Switch, Power Relay, Blade Fuse - 2 Leads

I ordered this harness for an add-on set of driving lights for my Wagoneer. This harness is exceptionally well made, and you can tell it will last. The connections seem very solid, and the wiring is covered with heat-shrink tubing. I added some wire wrap at the points where the harness will pass through metal as a precaution on my part. It appears to be long enough for nearly any vehicle. The relay is rated for 40 amps and appears to be well-constructed. The battery to the relay fuse is blade-style, 25 amps, and replaceable.The only questionable feature is that the switch has a red LED light that remains on when connected to battery power. I'm not sure if a switch with a light is necessary. I’m concerned that if the vehicle isn’t driven frequently, the light could drain the battery over time. I'll test the current draw on the switch before I install it.

The wiring harness appears to be great quality! The 14 AWG is very heavy duty and everything is double insulated. In my case, LED pod lights on a motorcycle it was overkill and excessively long. I think 16 AWG would be better. I cut out all the extra slack and spliced the wires to custom fit my application. The wires are not solid copper.It comes with a 25A fuse. So I recommend calculating the size you need.In another users review they mentioned to cut the yellow wire from the relay and splice it to a 12v power supply that turns on with the key. This prevents the led light from always being on and will only activate the relay when the key is turned on. Super helpful cause I didn’t want extra battery draw! I spliced it to the license plate light and achieved the same results.It’s great it came with connectors as well. This is exactly what I needed and is a great value. I would recommend to add another switch option that is more low profile and waterproof other wise the included one worked perfect.

I used the Nilight DT Connector Wire Kit to wire up the fog lights on my Ford Raptor, and it worked perfectly. The connectors are well-made and weatherproof, giving me peace of mind that they’ll hold up against moisture and dirt.The wiring kit made installation much easier and cleaner compared to splicing wires, and the plugs fit securely with no loose connections. Everything looks professional and functions flawlessly.If you’re installing fog lights or other auxiliary lighting, I’d definitely recommend this kit for a solid, hassle-free wiring solution.

I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.

This is one of the best and easiest wiring system to install that I have every used. And the price is great!

I did pay extra for the upgraded wire gauge and I'm very pleased with this product. I do recommend it and the wires were perfect length for my application on wiring up fog lights on my '06 Dodge Charger.

Que el artículo está bueno para el uso que se hizo

Easy self explanatory kit to install