PACKING LIST： A15H Drone (removable Li-ion battery installed) Remote (batteries not included) Protective Guard x4 USB Charger User Manual Spare Rotor Blades A x4, B x4 Spare Screws Screw Driver Assembling Your Drone 1. Unfold the rear crankshafts first, then the front crankshafts. Reverse the order when folding the crankshafts. 2. Remove the small plastic chips from rotors shell and install the protective guards. Gently pull to remove them for easier storage. Please keep the chips for future use. Features of the Quadcopter:Note that for modes 2, 3 & 4, the remote must be aligned with the tail of the quadcopter. 1. 3D Flip Function (Note the quadcopter must fly to a height of at least 3m (10ft) to operate this function). To activate: press the 3D flip button. Push the right joystick to perform a 360 degrees flip in a corresponding direction. 2. Headless Mode To activate: press the headless mode button, wait for the“Di Di” sound and wait for the LED to flash twice (use the joystick to determine direction). To exit: press the headless mode button again. 3. One Key Return To activate: press the return key and hold for 2-3 seconds (the quadcopter will return close to its starting point). To exit: press any key. 4. Trajectory Flight To activate: press the trajectory flight button (use the altitude hold function for a steady flight). To create a flight track: draw on the control panel (tap a blank area to cancel the track). To prolong the flight: adjust the scale on the bottom left of the display. To exit: press the trajectory flight button again. 5. Speed Switch Switch the speed at your choice. 6. Pressure Altitude Hold This mode helps the quadcopter to maintain a (roughly) consistent altitude. The user can control the roll and pitch, lean angles and heading.
Trustpilot
2 weeks ago
1 week ago
